Noticeboards Category: For Sale

https://docs.google.com/presentation/d/1QelkLXF95oqNycJasU9w0svTP3XVw2IShD_WUu_9nrg/edit?slide=id.g3aab4191c20_1_343#slide=id.g3aab4191c20_1_343
PDF link of workshop and equipment for sale.
Due to retirement and after 25 years of Glassmaking and exhibiting my work I am selling my workshop and various items of equipment which may be of interest to your members.
I attach a pdf link listing items for sale which I hope may be of interest..
Many thanks
Bill Swann
Email billswann24@gmail.com
Tel.07748668957

From the studio of the late Nancy Sutcliffe, in support of her JustGiving fundraiser for cancer research:

Complete sandblasting kit for smaller items – Stanley 1.5hp 24l 8 bar compressor, Mattis bench- or table-top sand blasting cabinet, rubber gauntlets, sandblasting gun, 10kg of aluminium oxide sandblasting grit. Never used (well, we did fire up the compressor once just to check it was working). Total cost new around around £350; price for collection £175.

Complete hand engraving setup – Foredom Micromotor (the best) with two handpieces and several dozen burrs (diamond and carbine point and ball burrs, numerous stone, rubber and silicone polishing burrs). Total cost well over £1,250; price for collection £750.

Complete portable wheel engraving setup – Merker KMK1 (newly serviced, new starter solenoid) with seven-step round belt pulleys for adjusting from 540 to 3360 rpm, steel spindle, splashguard screen, drip bottle, funnel, drip tray, armrest pads, and a good collection of diamond and ceramic engraving wheels and polishing wheels. Reasonably portable, a great starter kit, excellent as a studio extra. Total cost when new above £3,000; price for collection £1,500.
Plus any reasonable offer for any or all of …

– three lesser handheld drills (one Dremel, dunno what the others are – some bits included, plus a vertical drill stand)
– a collection of glass cutting tools (inc A3 cutting mat, circle cutter, steel set square)
– a quantity of solid optical glass blanks, about 40 in total, most square cubes but also rectangular blocks and paperweight-type roundels
– around a dozen Dartington lead crystal free-blown bowls, all pre-owned

Enquiries to Dennis Jarrett, whatsapp 07538658384 or email dennisjarrett@duck.com

From the studio of the late Nancy Sutcliffe, in support of her JustGiving fundraiser for cancer research:

Complete sandblasting kit for smaller items – Stanley 1.5hp 24l 8 bar compressor, Mattis bench- or table-top sand blasting cabinet, rubber gauntlets, sandblasting gun, 10kg of aluminium oxide sandblasting grit. Never used (well, we did fire up the compressor once just to check it was working). Total cost new around around £350; price for collection £175.

Complete hand engraving setup – Foredom Micromotor (the best) with two handpieces and several dozen burrs (diamond and carbine point and ball burrs, numerous stone, rubber and silicone polishing burrs). Total cost well over £1,250; price for collection £750.

Complete portable wheel engraving setup – Merker KMK1 (newly serviced, new starter solenoid) with seven-step round belt pulleys for adjusting from 540 to 3360 rpm, steel spindle, splashguard screen, drip bottle, funnel, drip tray, armrest pads, and a good collection of diamond and ceramic engraving wheels and polishing wheels. Reasonably portable, a great starter kit, excellent as a studio extra. Total cost when new above £3,000; price for collection £1,500.
Plus any reasonable offer for any or all of …

– three lesser handheld drills (one Dremel, dunno what the others are – some bits included, plus a vertical drill stand)
– a collection of glass cutting tools (inc A3 cutting mat, circle cutter, steel set square)
– a quantity of solid optical glass blanks, about 40 in total, most square cubes but also rectangular blocks and paperweight-type roundels
– around a dozen Dartington lead crystal free-blown bowls, all pre-owned

Enquiries to Dennis Jarrett, whatsapp 07538658384 or email dennisjarrett@duck.com

This is the Deep version of the Kilncare Pro-Fuser, so it gives you extra height internally which is really useful for slumping and casting, as well as fusing.

It can run off either single phase or three phase.

It is in excellent condition and was bought new only two years ago in 2023. It has had only light use, as we have a larger kiln which has been our main ‘workhorse’.

Internal dimensions are 850mm (W) x 510mm (D) x 330mm (H)

This comes with controller as well as the stand and castors.

This package currently costs £5831 new from WarmGlass or Kilncare. We are asking £4300 o.n.o.

Collection from Totnes in Devon.

Please contact 07815 893262 with any questions or drop us an email and we can reply with further photos.

REDUCED – GLASS KILN FOR SALE – EVENHEAT BE GTS 2541-13 REDUCED FOR QUICK SALE now- £1350 (DOWNSIZING STUDIO)

Excellent ‘bathtub style’ kiln, suitable for many aspects of kiln work due to its large, deep chamber with top & side elements. A great kiln for fusing, slumping, drop-outs & casting.

Bentrup TC60/8 controller, kiln stand & original 3 part kiln shelf included.

-Please click on ‘PDF’ for more details & photos.

Bought new in 2009, only selling due to downsizing studio & unfortunately no longer have the space.
Good condition, small crack on lid (repaired) as can be seen in the photos. Collection from East Yorkshire.
CONTACT- email- debbie.march@yahoo.co.uk

External measurements-
Width (inc. handles)- 90cm, Length (inc. handles)- 122cm, Height (on stand)- 68cm, Stand height 21cm.

Internal measurements-
Width (maximum)- 64cm, Length (maximum)- 103cm, Depth – 34cm.

Specification-
MAX TEMP- 982C
AMPS- 40A
VOLTAGE- 230V

Originally manufactured for 3 Phase supply but converted to Single Phase 40 Amp.
You should check that your power supply is suitable & the kiln be installed by a qualified electrician.

Transport- The kiln has lifting handles at both sides and requires two people to lift.
This kiln is heavy, will need a van.

ALSO SELLING A LARGE SELECTION OF CERAMIC MOULDS -SLUMPING, DROP-OUT & CASTING
will do separate listing, contact for more info.

Large Moulds – FOR SALE

Streamlining my studio, selling these large moulds. Most of them have been fired but in excellent condition (unless otherwise stated).

Email me at glassbylydiahaines@gmail.com if you are interested.
Payment via Paypal or bank transfer.
Collection in person in Leeds LS6. Or can be posted with additional P&P.

1. #SS1: Large Stainless Steel Oval Deep Slumping Mould @ £45 + P&P
Measurement (ext.): 51cm(L) x 22cm(W) x 5cm(D)
Measurement (Inside lip): 49cm(L) x 29cm(W) x 5cm(D)

2. #xLT: x-Large Triangle Mould @ £45 + P&P
Measurement (ext.): 45cm(W) x 39cm(H)
Measurement (int. dip): 21cm(W) x 19cm(H) x 2.5cm(D)

3. #xLRP: x-Large Round Shallow Plate @ £40 + P&P
Measurement: 42cm dia., 1.5cm deep

4. #xLDCa + #xLDCb: x-Large Deep Circular Flat Bottom Bowl Mould @ £45 + P&P – I have 2 units
Measurement: 40cm dia., 9cm deep

5. #HF127a + #HF127b: Bohle Lamp Bender (958.127) @ £45 + P&P per unit – I have 2 units.
Note: They are deeper and larger than Warm Glass Medium Lamp Bender Mould 8126
Measurement: 45cm x 40cm(H) x 14cm(D)

6. #LBSa + #LBSb: Lamp Bender Sconce @ £40 + P&P each – I have 2 units.
Measurement: 41cm x 24cm(H) x 10cm(D)

7. #DCW: Double Curve Wavy Mould @ £45 + P&P
Measurement: 41cm x 34cm x 8cm (D)

8. #CRC: Concave Rectangle Curve Mould @ £40 + P&P
Measurement: 39cm(L) x 32cm(W) x 5cm(D)

9. #CM: Craig Mitchell Smith Floral and Foliage 7 Piece Mould Set @ £30 + P&P
Measurement: 23.5cm x 10.5cm

10. #SBM: Spherical (Round Bottom) Bowl Mould @ £35 + P&P
Measurement: 30cm dia. x 7cm(D)

11. #DSB: Deep Square Bowl @ £35 + P&P
Measurement: 30cm x 30cm x 7cm(D)

12. #SMR: Slumpy’s 8 inch Mini-Melt Ceramic Casting Ring (SM-1602) @ £20 + P&P
Condition: Brand New, Never been fired.
Measurements: 20cm dia.

13. #SS: Square Slumper @ £25+P&P
Measurements: 30cmx30cmx6.5cm

14. #FBM Set: Fireworks Stainless Steel Graphite Tongs + Stainless Steel Bracelet Mandrel + brand new Colour de Verre Plain Border / Bracelet Mould @ £50 + P&P for the set

Sold individually or Job Lot @ £500 + P&P

🔥 FK Fusing Kiln + KC 55/28 GT Kiln (Glass Modification) – Barely Used 🔥
Condition: Like new – both kilns have been fired only 5 times each and spent most of their life in storage. Perfect for glass artists, ceramicists, or studios looking for professional, high-capacity equipment.

🔹 KC 55/28 GT Kiln – Glass Modified (Model M1)
Internal Chamber: 1600mm (L) × 690mm (W) × 1000mm (D)

Designed for glass fusing, slumping, and casting

Even heat distribution for consistent results

Robust build and precise temperature control

🔹 FK Fusing Kiln
External Dimensions: 1350mm (W) × 1220mm (H) × 900mm (D)

Internal Chamber: 1000mm (W) × 500mm (D) × 250mm (H)

Ideal for glass and ceramics

Easy-lift lid system for safe loading/unloading

Excellent thermal stability and even heating

✅ Lightly used – only 5 firings each
✅ Professional-grade build quality
✅ Suitable for both studio and production work

💷 Price: £4000 for both – No Offers Must Go This Week, Open to Selling Seperate
📍 Location: Malvern

📩 Message Kenneth now for viewing – 07359499557

Can Arrange Delivery and will cover a service upto £100 to make sure everything is in working order!

A glass display cabinet 30cm cubes £75 ono- see photo of similar and video link

And some stone blocks for displaying glass. Variety of sizes with gaps 7mm-12mm £75 ono – see photos

Some lead strips for stained glass. £25

Email Text or call Paula 07770 365 351

Collect from Lechlade

Video : https://share.icloud.com/photos/01ankQMA5fhjNMTXBIxGecnpA

GLASS KILN FOR SALE – EVENHEAT BE GTS 2541-13 £1800

Excellent ‘bathtub style’ kiln, suitable for many aspects of kiln work due to its large, deep chamber with top & side elements.
Bentrup TC60/8 controller, kiln stand & original 3 part kiln shelf included.

-Please click on PDF below for more details.

Bought new in 2009, only selling due to downsizing studio & unfortunately no longer have the space.
I will also be selling a large selection of ceramic moulds in a separate listing.

Good condition, small crack on lid (repaired) as can be seen in the photos. Collection from East Yorkshire.
CONTACT- email- debbie.march@yahoo.co.uk

External measurements-
Width (inc. handles)- 90cm, Length (inc. handles)- 122cm, Height (on stand)- 68cm, Stand height 21cm.

Internal measurements-
Width (maximum)- 64cm, Length (maximum)- 103cm, Depth – 34cm.

Specification-
MAX TEMP- 982C
AMPS- 40A
VOLTAGE- 230V

Originally manufactured for 3 Phase supply but converted to Single Phase 40 Amp.
You should check that your power supply is suitable & the kiln be installed by a qualified electrician.

The kiln has lifting handles at both sides and requires two people to lift.
This kiln is heavy, will need a van.